CV Tetelbaum

CURRICULUM VITAE

Alexander Tetelbaum

 

Education: 

Doctor of Engineering Science (PhD+), Computer Sciences and Engineering, National University of Radio-Engineering of Russia (Taganrog), 1986. Title of Thesis: Mathematical Foundations of Metrically‑Topological Design of VLSI in CAD Systems [Classified]. (There are only relative few who earned the distinguished degree of Doctor of Engineering Science, which requires a second advanced thesis (dissertation) and at least ten years of outstanding scholarly contributions beyond the Ph.D. Note that Dr. Eric Goodman from Michigan State University has classified this degree as having at least the status of Fellow in a major U.S. professional society.)

Doctor of Philosophy (PhD), Electrical and Computer Engineering, National Technical University of Ukraine, 1975. Title of Thesis: Research and Development of Computer Methods for Electronic Design Automation.

MS in Electronics, Diploma of Engineer, National Technical University of Ukraine, 1972.

 

Employment:

Administrative Appointments

President/CEO, Abelite Design Automation, 2012‑present

President, International Solomon University, Kiev, Ukraine, 1991‑1995

Associate Dean for International Studies and Programs, Engineering College, Michigan State University, 1994-1996

President, Center of International Solomon University, 1991‑1995

 

 Regular Appointments

Principal Engineer / Engineering Manager, LSI Corporation, 1998-2011

CAD Manager, Silicon Graphics Corporation, 1996-1998

Director of Parallel Simulation, Zycad Corporation, 1996-1997

Adjunct Professor, Electrical Engineering and Computer Science Department, Michigan State University, 1993-1996

Professor, Distinguished Scientist, Computer and Electrical Engineering Department, National Technical University of Ukraine, 1987‑1992

Director of Design Automation Lab, National Technical University of Ukraine, 1975‑1987           

Junior Scientist, Computer Science Department, National Technical University of Ukraine, 1973‑1975

Engineer, CAD Department, Kiev Institute of Cybernetics, 1972‑1973

 

Leave Appointments

Visiting Scholar and Professor of Electrical and Computer Engineering, Michigan State University, USA, 1993 (Jan) ‑1994 (Dec)

Visiting Professor of Computer Science, Taganrog State University of Radio-Engineering of Russia, 1986 (May‑June)

Visiting Professor, State Engineering University of Armenia, 1983 (Sep‑Oct)

 

Other Employment:

Associate Professor, National Technical University of Ukraine Advanced Courses for Senior Industrial Engineers, 1980-1987

 

Consulting/Part-time Activity:

President/CTO, Intreen Corp., 2004-2005

Chief Scientist, Celagroup Corp., 1997-2004

Consultant, CAD Service of Institute of Cybernetics, 1990‑1992

Consultant, Microprocessor Institute, 1986‑1990

Consultant, Institute of Computer Peripheral Equipment, 1985‑1991

 

Academic Specialization:

Electrical and Computer Engineering:

Design Automation of VLSI Systems, Computer Engineering, Logical Design and Microprocessor Engineering, VLSI Design and VHDL, Electrical Network Theory.

 

Computer Science:

Artificial Intelligence, Theory of Algorithms and Combinatorial Optimization, Graph and Hypergraph Theory and Algorithms, Data Structures and Computation Theory, Applied Mathematics, Genetic Algorithms, Computer Architecture, Software Engineering, Fuzzy Set Theory, Statistics, Programming Languages (Python, C, C++, Fortran, Algol), Mathematics for Engineers, Non‑standard Problem Solving.

 

Courses delivered at MSU during 1993-1996:

           “Non-Standard Problems: Solving and Critical Thinking”

“Electronic Design Automation” (EE-411)

“Microprocessors and Digital Systems” (EE-331)

“Logic Design Principles” (EE-813)

“Special problems in international engineering” (EGR 400)

“Special topics in international engineering” (EGR 475), and

 

Software Experience

Programming: C/C++, PYTHON, FORTRAN, ALGOL, etc.

Software systems: EDA Tools (from Synopsys, Cadence, Magma, Mentor Graphics), PrimeTime, Hspice, ACAD, MATLAB, MS Office with deep knowledge of Excel, Framemaker, etc.

 

Research Background

 

Main Area of Research Interests:     

 

Electronic Design Automation with a special interest in variations (multiple sources of variations like process, voltage, temperature, and EDA tools and models inaccuracies) that impact performance, timing violations and timing yield; in computer/ASIC design and signoff methodology, design and signal integrity (timing signoff, state-of-the-art STA tools, sources of variation, crosstalk, clock, signal electro-migration, and SSTA) and Electronic Design Automation (EDA) methodology and tool development; in physical design automation (partitioning, placement, global and detail routing); signal integrity (crosstalk, clock, electro migration), performance-driven methods; timing optimization; models of circuits and layouts; estimation of time delay and geometrical parameters of electronic chips and blocks; probability and stochastic modeling; hierarchical design; analysis and development of complex algorithms for EDA; hierarchical system analysis and evaluation.

Computer Architecture (with a special interest in distributed and parallel systems, parallel computing and programming, hardware/software parallelism, program partitioning and scheduling, system interconnect architectures).

Other Areas of Research Interests:   

 

Internet Search Methods (with a special interest in relation search, relation visualization, and intelligent search).

Graph Theory (with a special interest in optimization problems on graphs and hypergraphs; determination of critical paths; algorithms for shortest paths and shortest spanning trees; analysis of graph and hypergraph planarity; planar embedding of planar graphs and hypergraphs; algorithms for the traveling salesman problem; combinatorial mathematics on graphs).

Combinatorial Optimization Problem Solving (with a special concern for genetic algorithms; stochastic search algorithms: simulated annealing and evolutionary algorithms; design and analysis of computer algorithms; bin packing, cutting, and nesting problems; applicable hierarchical methods; analysis of computational complexity for hierarchical computing; algorithms and data structures, applied combinatorial mathematics on graphs and hypergraphs).

Artificial Intelligence (with a special concern for natural language communication, inference engines, logical deduction, the use of formal methods in software design, automated reasoning, and problem‑solving-methods).

Non‑standard Problem Solving (with a special interest in non‑formal task formulation, methods for analysis and solving of nonstandard problems).

 

Recognition and Honors:

 

President emeritus, International Solomon University

Foreign Fellow of the Academy of Natural Science of Russian Federation, Section of Informatics and Cybernetics (1995)

President, International Academy of Sciences and Arts (1995-1996)

President, International Solomon Association (1995‑1997)

Honorary Doctor, Dneprodzerzhinsk State Technical University (1996)

Senior Member, Institute of Electrical and Electronics Engineers (1993)

Member of the New York Academy of Sciences (1994)

Member of the International Informational Technology Academy (1993)

Member of the American Association for Advancement of Science (1995)

Research Fellow of the American Biographical Institute (1996)

Member of the Board of Trustees of the Ukrainian Center of Political Research (1992)

Member of the Doctoral Dissertation Panel of Institute of Computer Equipment (1991)

Scientist in EDA, Elected by the National Certification Commission (1986)

Member of the Electronics and Computers Board of the USSR Education and Science Society (1986)

Government Medal “For Achievements in Science” (1991)

Government Medal “For outstanding achievements in science and technology” (1985)

“The Best Paper of the Year” of the journal Foreign Electronics (1977)

“Best Technical Paper Award” by the SNUG-2011 Technical Committee (2011).

“The Best Paper of the Year” of the journal Foreign Electronics (1981)

LSI Logic Corp.: Patent champion (2001-2005), Technical Excellence Award (2001),

Engineering Excellence Award (2000), Key Contributor Award (1999)

Honor Certificates for achievements in professional and scientific activity (1976‑1991)

Engineer Degree with High Honors, National Technical University of Ukraine (1972)

National Technical University of Ukraine Distinguished Scholarship (1966‑1972)

Winner of the National Competitions “The Best Student Scientific Work” (1970-1972)

Silver Medal, Kiev Mathematical High School (1966)

 

Listings:

 

Who’s Who in the World (12th Edition, 1995, 13th Edition, 1996, 14th Edition, 1997)

5000 Personalities of the World (5th Edition, 1996)

Ukrainian famous native in WorldAtlas.com ……………………………… (http://www.worldatlas.com/webimage/countrys/europe/ukraine/uafamous4.htm)

Longman Reference on Research Directories and CD ROM (1994)

Men of Achievement (16th Edition, 1994, 17th Edition, 1995)

Who’s Who in Technology (7th Edition, 1995)

Who’s Who in American Education (5th Edition, 1996, 1997)

Who’s Who in Science and Engineering (3rd Edition, 1996, 1997)

American Men and Women of Science (2005)

The International Executive Guild’s Who’s Who (2001)

The International Directory of Distinguished Leadership (6th Edition, 1996)

New York Academy of Sciences 1996 Membership Directory (1996)

 

Professional Memberships:

Senior Member, Institute of Electrical and Electronics Engineers (IEEE), 1993-2011

Member of Gigascale Silicon Research Center (GSRC), 2003-2010

Executive Boardroom Member at Sun Microsystems, since 2003

Member, Silicon Integration Initiative (Si2), since 2006

Foreign Fellow of Russian Fuzzy Systems Association, since 1996

Member of Intel Developer Forum Community, since 2006

Member, IEEE Circuits and Systems Society, 1993-2011

Member, the International Mentor Graphics Users’ Group (MUG), since 1995

Member, the MSU Genetic Algorithms Research and Applications Group, 1994-1997

Member of the Pure Software Users Group (Parallel and Distributed Calculation), since 1996

Member, Accreditation Commission of the Ukrainian Higher Education Ministry, 1992-1993

Member, International Association of Engineering Education (IGIP), 1990-1992

Member of the of CAD/CAM Association Presidium, since 1991

Member, Expert Board of National Technical University of Ukraine, 1986-1991

Scientific Secretary, CAD Systems Board of the Ukrainian Education Ministry, 1985‑1990

 

Publications

 

265      Total (see lists below & separate lists):

8      Books

43      U.S. Patents

3      U.S. patent-pending applications

94      Sole authored publications

19      Papers published in USA and international journals and proceedings

14      Papers in journals which were translated in English Language in the USA

108      International Refereed Papers

101     Conference Proceedings Papers

21     Conference Reviews & Papers reviewed by Mathematical Reviews of AMS

12      Manuals

71      Research Reports

51      Invited Presentations

 

Other Academic and Professional Data

 

6        Supervised PhD Dissertations

9        PhD Dissertations, External Examiner

52        PhD Dissertations, External Referee

4        Books, Editor

3        International Conferences, General Chair or Co‑chair

17        Conferences and Symposiums, Member of Organization or Program Committees

19        Conferences and Symposiums, Chairperson of Sessions

7        Public Committees and Boards, Member

 

Research Contracts/Grants and Software Sales (During Work in Academia):

 

Years                Number                        $

            Contracts/Grants:

Project Investigator                 1972‑1975       3 Contracts                   7,720 K

Program Director                    1975‑1986       8 Contracts                 10,532 K

Principal Investigator              1986‑1992       5 Contracts                   6,657 K

Program Director                    1992-1996       5 Grants                          681 K

Subtotal:         21 Contracts/Grants   $25.590 M

            Sales of Software for EDA:

Workstation ARM2-01           1975-1993       312 Sales                   $76.071 M

LSI CAD Systems                  1978-1995         72 Sales                 $137.983 M

Subtotal:          384 Sales                 $214.054 M

TOTAL:                                          $239.644 M

 

Titles of Contracts/Grants:

 

“R&D of an Integrated CAD System for VLSI Microcircuits”

“R&D of Software for Workstation ARM2‑01”

“R&D of Layout Algorithms for ARM2‑01 Workstation”

“Optimization Layout Procedures for ARM2‑01 Workstation”

“Development of a CAD System for Standard Cell Chip Design”

“Development of a CAD Subsystem for the General Cell Chip Design”

“R&D of an Interactive Graphic System for the IC Layout Design”

“Development of an Educational CAD System”

“R&D of a CAD System for TV VLSI Circuits”

“R&D of a CAD System for Linear Bipolar Circuits”

“R&D of Algorithms and Codes for the Adequate Models Building”

“R&D of a Method for the Computer Synthesis of the VLSI Circuit Layout”

“Sub‑System ARAMIS for the Adequate Circuit Models Building”

“R&D of Methods and Algorithms for the Full Custom IC Synthesis”

“R&D of a CAD System for the Planar Circuits Design”

“R&D of Effective Methods, Algorithms and Codes for the Layout CAD”

“Computer Hardware for Managing ISU”. G. Soros Foundation (USA), 1992-1993

“Improvement of ISU Education Process”. Joint Distribution Committee (USA), 1993-1994

“Computerization and Communication in Higher Education”. International Science Foundation (USA), 1993-1994

“Computerizing of ISU Education. Rich Foundation (France)”, 1993-1994

“Education, Communication, and Computer Support of ISU”. Joint Distribution Committee (USA), 1995-1996

 

 

Publications/Patents are listed in Patents, Books, and Papers web pages.

 

Manuals

Statistical Methods For Semiconductor Chip Design, Authours: Antenor de Carvalho, Eduardo Flores, Nagib Hakim, Jeffrey Hemmett, Sachin Idgunji,, Kerim Kalafala, Patrick McGuinness, Ayhan Mutlu, Mahesh Sharma, Oscar M. Siguenza, Ashish Srivastava, Alexander Tetelbaum, Published by Silicon Integration Initiative, Inc. (Si2TM),  9111 Jollyville Road, Suite 250, Austin TX 78759, ISBN: 1-882750-35-7, Version 1.0, 02 December 2008,  p. 54.

PETRENKO, A.I., TETELBAUM, A., SHRAMCHENKO, B.L. “Methodic Recommendations on Application of the System ARTIS-1504 for Hierarchical Design of VLSI Gate Arrays”, National Technical University of Ukraine, 1987, p. 32.

TETELBAUM, A., SHRAMCHENKO, B.L. and KONDRATENKO, A. I. “Methodic Recommendations on Application of the PCB CAD System KIEV-1504”, National Technical University of Ukraine, 1987, p. 51.

PETRENKO, A.I., TETELBAUM, A., LESKIN, V.F. and STECENKO, S., “Methodic Recommendations on Application of PCB CAD System LUCH”, National Technical University of Ukraine, 1985, p. 63.

PETRENKO, A.I., TETELBAUM, A., SHRAMCHENKO, B.L., LESKIN, V.F. and TITOV, A. “Methodic Recommendations on Application of PCB CAD System PARK”, National Technical University of Ukraine, 1984, p. 63.

PETRENKO, A.I., TETELBAUM, A., KISELEV, G.D., BUDNYAK, A.A. and BUBLIC, S.A. “Methodic Recommendations on Architecture and Application of Educational CAD System”, National Technical University of Ukraine, 1984, p. 28.

PETRENKO, A.I., TETELBAUM, A. and SHRAMCHENKO, B.L. “Methodic   Recommendations on Application of the System ARTIS for VLSI Circuit Design”, National Technical University of Ukraine, 1983, p. 56.

PETRENKO, A.I., TETELBAUM, A. and SHRAMCHENKO, B.L. “Methodic   Recommendations on Application of the System COMPRESS for Solving Placement Problems”, National Technical University of Ukraine, 1981, p. 72.

PETRENKO, A.I., TETELBAUM, A., BUDNYAK A.A. and SHRAMCHENKO, B.L.  “Electronics Design Automation”, National Technical University of Ukraine, 1977, p. 40.

PETRENKO, A.I., TETELBAUM, A., ABAKUMOV, V.G., BUDNYAK A.A. and   SHRAMCHENKO, B.L. “Investigation of CAD Methods of the PCB CAD System”, National Technical University of Ukraine, 1977, p. 78.

 

PETRENKO, A.I., TETELBAUM, A., and KAPSHUK, O.A. “Methodic Recommendations on Student Science Researches”, National Technical University of Ukraine, 1976, p. 67.

PETRENKO, A.I., TETELBAUM, A. and ABAKUMOV, V.G. “Physical Design Automation”,   National Technical University of Ukraine, 1976, p. 74.

 

Academia Research Reports

 

E. D. GOODMAN, A. TETELBAUM, and V. M. KUREICHIK, GA Approach to Compaction,  Bin Packing, and Nesting Problems, Technical Report # 940502, RELEASE 1.01 (July 12, 1994), Michigan State University, 70 p.

A. TETELBAUM, “Generalizations of Rent’s Rule and Estimation of an Average Interconnection Length”, Technical Report, # 930405, RELEASE 1.01 (August 16, 1993), Department of Electrical Engineering, Michigan State University, 42 p.

A. TETELBAUM and M. A. SHANBLATT, “High‑level Methodological and Algorithmic Foundations for Very Large Scale Logic Design”, Technical Report, # 930703, RELEASE 1.01 (October 1, 1993), Department of Electrical Engineering, Michigan State University, 51 p.

A. TETELBAUM, C.L. WEY, and T. BICKART, “A cell‑level‑based performance‑driven  standard‑cell placement,” Technical Report, # 930801,  RELEASE 1.01 (July 12, 1994) Department of Electrical Engineering, Michigan State University, 62 p.

A. TETELBAUM “Complicated graph path functions and optimum path search,” Technical  Report, # 930211,  RELEASE 1.01 (April 2, 1993), Department of Electrical Engineering, Michigan State University, 31 p.

A. TETELBAUM et al, “Development Integrated CAD System for VLSI Microcircuits”, No.  0. C. 027.0547/2203 [Classified].

A. TETELBAUM et al, “Development Software for Workstation ARM2-01”, No.   01830070523/186.

A. TETELBAUM et al, “Algorithms of Placement, Packaging and Routing for ARM2-01 Workstation”, No. 01824050043/213.

A. TETELBAUM et al, “Package of Optimization Layout Procedures for ARM2-01   Workstation”, No. 01820075980/98.

A. TETELBAUM et al, “Development CAD System for Standard Cell Chip Design”, No.  1.9.12.3.9/119.

A. TETELBAUM et al, “Development CAD Subsystem for General Cell Chip Design”, No.  1.9.12.3.4/47.

A. TETELBAUM et al, “Development Interactive Graphic System for IC Layout Design”, No.  0.80.631c/5 [Classified].

A. TETELBAUM et al, “Development Educational CAD System”, No. 474/250/132-B477811.

A. TETELBAUM et al, “Investigation of Ways to Build a CAD System for TV VLSI Circuits”, No. GP 0186019856/0287.0062875.

A. TETELBAUM et al, “Development and Investigation of the CAD System for Linear Bipolar Circuits”, No. GP 01820075979/0287.00628873.

A. TETELBAUM et al, “Development Methods, Algorithms and Codes for Adequate Model Building”, No. Inv. B -937486-81031303 [Classified].

A. TETELBAUM et al, “Development a Method for Computer Synthesis of VLSI Circuit Layout”, No. Inv. B-937488-79076239 [Classified].

 

A. TETELBAUM et al, “Sub-System ARAMIS for Adequate Circuit Model Building”, No.  Inv.  B-976124-78014347 [Classified].

A. TETELBAUM et al, “Development Methods and Algorithms for Full Costumer IC Synthesis”, No. Inv.  B-8575506-74042928 [Classified].

A. TETELBAUM et al, “Development and Investigation of the CAD System for Planar Circuits Design”, No. Inv. B-842234-74042934 [Classified].

A. TETELBAUM et al, “Investigation of Effective Methods, Algorithms and Codes for Layout CAD”, No. Inv.  B-705599-01816013187 [Classified].

 

Reviews

 

TETELBAUM, A. Review of Duchet, Pierre, “Hypergraphs. Handbook of combinatorics”, Mathematical Reviews, American Mathematical Society, 1996.

TETELBAUM, A. Review of Eiter T. and G. Gottlob, “Identifying the Minimal Transversals of a Hypergraph and Related Problems”, Mathematical Reviews, American Mathematical Society, 1996.

TETELBAUM, A. Review of Ordman, Edward T. “Cliques in Hypergraphs and Mutual Exclusion Using Tokens”, Mathematical Reviews, American Mathematical Society, 1996.

TETELBAUM, A. Review of Hell, Pavol and Huang, Jing “Lexicographic Orientation and Representation Algorithms for Comparability Graphs, Proper Circular Arc Graphs, and Proper Interval Graphs”, Mathematical Reviews, American Mathematical Society, 1996.

TETELBAUM, A. Review of Berge, Claude “About vertex‑critical non‑bicolorable hypergraphs”, Mathematical Reviews, American Mathematical Society, 1995.

TETELBAUM, A. Review of Pomykala, J.A., Pomykala, J.M. “On Regularity of Hypergraph Sequences”, Mathematical Reviews, American Mathematical Society, 1995.

TETELBAUM, A. Review of Seoud, M.A and Woodall, D.R. “Primary Graphs”, Mathematical  Reviews, American Mathematical Society,  1995.

 

Other Academic and Professional Data:

Supervised PhD Dissertations:

“Optimization of Complex Printed Circuit Board Layout”, Bila, Yuri, January, 1993.

“Research of Effectiveness of CAD Systems” [Classified], Itkin, Vladimir, September, 1990.

“Top‑down Layout Design of Gate Arrays” [Classified], Lugansky, Nick, April, 1988.

“Topological Routing of Multilayer PCBs”, Zabaluev, Nickolay, October, 1986.

“Physical Design Automation of Hybrid Circuits”, Angelov, Angel, June, 1984.

“Research of Electronic Circuit Planarity”, Shramchenko, Boris, February, 1982.

 

 

External PhD Dissertation Examiner:

 

“Research and Development PCB CAD System on Personal Computer”, Maslov, A.V., Kiev, 1992.

“Investigation of PCB CAD Strategies” [Classified], Zaichenko, S.P., Kishenev, 1991.

“Design Automation of The Device-Technology Basis for Digital Microcircuits” [Classified], Leshenko, D.N., Kishenev, 1989.

“Development of Group Dialog CAD Systems for Computer Equipment Design” [Classified], Rize, E.S., Moscow, 1988.

“Symbolic Layout Design Automation for LSI Microcircuits” [Classified], Rubsov, V.P., Kiev, 1987.

“Algorithms and Codes of LSI Automatic Placement and Routing for Interactive CAD Systems” [Classified], Gadaev, A.G., Kiev, 1986.

“Software for Automation of Graphic Information Mapping During Computer Design”, Bibhakar Saran, Kiev, 1985.

“Estimation of Rational Sizes and Shapes of Electronic Boards”, Aslikyan, E., Yerevan, 1985.

“Investigation of Layout Objective Functions”, Gondul, V.P., Kiev, 1984.

 

Editor of Books:

 

GERSHUNSKY, B.S. “Electronic Circuit Analysis”, Kiev, Higher Education, 1983.

PETRENKO, A.I., LADOGUBEC, V.V. and TCHKALOV, V.V. “Circuit Design Automation in Mechanical Engineering”, Kiev, UMK BO, 1988.

SINEKOP, Y.S., CURIN, O.P. and BONAT ERNANDES. “Flexible Technology for Electronic Devices Manufacture”, Kiev, UMK BO, 1986.

KULAKOV O.F. “Software of Computers”, Kiev, Znannya, 1975.

 

Reviewer for

Mathematical Reviews (American Mathematical Society), 1994-1996

The 13th World Multi-Conference on Systemics, Cybernetics and Informatics:

WMSCI 2009

SNUG Conference, San Jose, 2011

SNUG Conference, Boston, 2011

SNUG Conference, Silicon Valley, 2012

The 13th World Multi-Conference on Systemics, Cybernetics and Informatics:

WMSCI 2010

 

Conferences and Symposiums:

General Chair or Co-chair

International Conference on Intelligent Systems, ICIS-95, September 1995, Gelengick, Russia.

Computer-Aided Design International Conference in Russia, CADR-96, September 1996, Gelengick, Russia.

International Conference on Strength, Durability and Stability of Materials and Structures,    SDSMS-96, September 18 ‑ 20, 1996. Kaunas, Lithuania.

 

 

Member of Organization or Program Committees

SNUG Conference, San Jose, 2011

SNUG Conference, Boston, 2011

IEEE International Workshop on Microprocessor Test and Verification, 2008. (Technical Program Committee)

IEEE International Workshop on Microprocessor Test and Verification, 2006. (Technical Program Committee)

The 1997 International Conference on Intelligent Information Systems, Grand Bahamas Island, the Bahamas, December 8-10, 1997

Baltic Electronics Conference, The 5th Biennial Conference on Electronics and Microsystems Technology, Tallinn, Estonia, October 1996

Conference on CAD Systems for VLSI Microcircuits, 1986, 1987, 1988, 1989, 1990, 1991,             1992

International Conference on Intelligent CAD Systems in Electronics, 1989, 1991

International Symposium on CAD System Applications, 1988, 1990

 

Chairperson/Moderator of Sessions

SNUG Conference, San Jose, 2011

Conference on CAD Systems for VLSI Microcircuits, 1986, 1987, 1988, 1989, 1990,                       1991, 1992

Conference on CAD Systems, 1990, 1991

International Conference on Intelligent CAD Systems in Electronics, 1987, 1989

International Symposium on CAD System Applications, 1982, 1984

Conference on Physical Design Automation, 1978, 1980, 1984, 1988, 1991

 

Committee Leadership and Service:

 

Michigan State University

International Program Committee, College of Engineering, 1995-1996

EE Graduate Committee, 1995-1996.

 

Invited Presentations:

Invited and contributed papers appearing in proceedings of a meeting and corporate presentations are not included here.

“Impact of Temperature Inversion on Timing Sign-off and Design Methodology.” A presentation at MTV Workshop, Austin, TX, Dec 5-6, 2007, 30 min

“Circuit Simulation on Massively Parallel Accelerators.” A talk at PRECEDENCE, Inc., Los Gatos, California, USA, May 2, 1997, 60 min

“A Topological Method of Routing and Optimizing PCBs and MCMs.” Seminar of Interconnectix, Inc., Portland, USA, July 2, 1996, 45 min

“Classification of Complex Graph Path Functions”. The School of Electrical Engineering and Computer Science Seminar, Ohio University, Athens, USA. June 17, 1996, 1 hour

“Monotone Path Functions of a Graph and the Search for Optimal VLSI Designs”. Computer Science Colloquium, Michigan State University, East Lansing, USA. January 17, 1995, 1 hour

“Insights into Graph Theory Using Analogous Physics Problems” Mathematics Research Colloquium, AT&T Bell Laboratories, Murray Hill, USA. October 6, 1994, 1 hour

“Modern Technologies for Computer and Communication Industries” Lecture in Kiev Technological University, Kiev, Ukraine. May 22, 1995, 2 hours

“Modern Informational Technologies” Lecture in International Solomon University, Kiev, Ukraine. December 9, 1994, 2 hours

“Genetic Algorithms and their Applications” Lecture, Moscow State Bauman Technological University, Moscow, Russia. December 13, 1994, 2 hours

“Modern CAD Methodologies” Lecture in Mechanic and Optic University, St. Petersburg, Russia. December 15, 1994, 2 hours

“Genetic Algorithms for Solution of Problems in Computer Science and Communication” Lecture in Tallinn Technical University, Tallinn, Estonia. December 19, 1994, 2 hours

“Stochastic and Genetic Algorithms of Optimization” Lecture in Kaunas Polytechnic University, Kaunas, Lithuania. December 21, 1994, 2 hours

“Genetic Algorithms” Lectures in International Solomon University, Kiev, Ukraine. August, 1994, 6 hours

“Non-standard Problems and Methods of their Solution” Lectures in International Solomon University, Kiev, Ukraine. February, 1994, 6 hours

“Layout Design of Integrated Analog Circuits” Computers Seminar, Kiev Institute of Cybernetics, Ukraine, December 9, 1992, 1 hour

“Analog Circuit Theory for Aided Computer Design”, Information Division Seminar, Ukrainian Academy of Sciences, Ukraine, September 9, 1992, 40 minutes

“Algorithmic Graph Theory for Engineering Problem Solving” Advance Technology and Science Seminar, “ARSENAL” Company, Ukraine, July 10, 1992, 2 hours

“Design and Theory of O(n log n) Algorithms”, Computer Science Seminar, Zaporozhsky Electronics Bureau, Ukraine, May 19, 1992, 40 minutes

Parasitics in Analog Circuits”, Computers Seminar, Kiev Institute of Cybernetics, Ukraine, December 16, 1991, 40 minutes

Crosstalk in Analog Circuits”, Computers Seminar, Kiev Institute of Cybernetics, Ukraine, December 9, 1991, 40 minutes

“Coprocessors for Electrical Design Automation” Research Seminar in Kiev Institute of Computer Peripheral Equipment, Ukraine, October 26, 1991, 1 hour

“Data Structures and Modern Programming Concepts”, Advance Technology and Science Meeting”, Moscow Military Company “RODYNA”, Russia, March 2, 1991, 2 hours

“Introduction to Technical Computing and Programming”, Lectures, “COMMUNIST” Military Corporation, Ukraine, July, 1991, 12 hours

“Knowledge-Based Systems for Electric Design”, Computer Systems Seminar, “COMPUTER SYSTEM” Corporation, Ukraine, February 18, 1991, 2 hours

“Software Engineering and Computer Systems”, New Concepts Seminar, Kiev Firm “VEGA”, Ukraine, January 8, 1991, 1 hour

Formal Synthesis in Analog Circuits”, Computers Seminar, Kiev Institute of Cybernetics, Ukraine, December 12, 1990, 40 minutes

Integrated Powerful CAD Systems for VLSI“, Electrical Engineering Colloquium, Kiev Microprocessor Institute, Ukraine, November 21, 1990, 1 hour

“Parallel Computing in Electrical Design Automation”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 25, 1990, 1 hour

“Analog and Digital Communication Systems”, Communication Seminar, Odessa Polytechnic University, Ukraine, June 28, 1990, 2 hours

“Parallel Computer Architectures”, Computer Systems Seminar, Academy of Sciences, Moscow Research Institute of Computers and Precise Mechanics, Russia, March 12, 1990, 2 hours

“Advanced CAD Systems for Analog and Digital Integrated Circuit Design“, Electrical Engineering Colloquium, Kiev Microprocessor Institute, Ukraine, November 18, 1989, 1 hour

“New Software and Hardware for Electrical Design Automation”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 21, 1989, 1 hour

“Main Parameters of Electronic Devices”, Lectures, Kiev Electron-Mach Company, Ukraine, June, 1989, 6 hours

“Signals, Signal Processing and Linear/Nonlinear Systems”, Electronic Systems Seminar, Kiev Institute of Radioelectronics, Ukraine, May, 1989, 6 hours

Analog-Digital Integrated Circuit Design“, Electrical Engineering Colloquium, Kiev Microprocessor Institute, Ukraine, November 16, 1988, 1 hour

“Powerful Workstations for Electrical Design Automation”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 29, 1988, 1 hour

“Integrated Circuit Design and Integrated Fabrication”, Technology Seminar, Kiev Electric Corporation, Ukraine, October 9, 1988, 30 minutes

“Electrical Design Automation and Software Engineering” Electrical Engineering Lectures, Gabrovo Electronic University, Bulgaria, May, 1988, 12 hours

“Digital Electronics for Super Computers”, Scientific Meeting, Kiev Corporation of Precise Electronics and Mechanics, Ukraine, November 17, 1987, 40 minutes

“Special Effects in Analog Integrated Circuits“, Electrical Engineering Colloquium, Kiev Microprocessor Institute, Ukraine, November 11, 1987, 1 hour

“Workstations for the Printed Circuit Boards Design”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 19, 1987, 1 hour

“Electric Circuits and Systems”, Lectures, National Technical University of Ukraine Advanced Courses for Senior  Industrial Engineers,  Ukraine, October-March, 1980-1987, 24 hours

CAD Tools for the Analog Integrated Circuit Design“, Electrical Engineering Colloquium, Kiev Microprocessor Institute, Ukraine, November 16, 1986, 1 hour

“Main Design Parameters of Printed Circuit Boards”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 23, 1986, 1 hour

“Efficient Algorithms and Computing; Computer Organization and Languages; Artificial Intelligence and Symbolic Programming”, Computer Science Lectures, Taganrog State University of Radio-Engineering, Russia, May‑June, 1986, 8 hours

“Algorithms of Circuit Design and CAD Tools”, Lectures, Kiev Institute of Advance Study in Electronics, Ukraine, April, 1986, 8 hours

“Electronic Circuits and Automation”, Research Seminar, Kiev Institute of Computer Peripheral Equipment, Ukraine, October 24, 1985, 1 hour

“Logic Design Principles and VLSI”, Research Seminar, Moscow Research Institute “ELAS”, Russia, August 12, 1985, 1 hour

“Contemporary Electronic Instrumentation and Systems”, Lectures, Leningrad Research Institute “POSITRON”, Russia, June, 1984, 3 hours

“Artificial Intelligence and Complex Problems; Discrete and Distributed Structures in Computer Science; Modeling and Discrete Simulation”, Electronics and Computer Science Lectures, Yerevan Polytechnic University, Armenia, Sep‑Oct, 1983, 12 hours

“Digital Logic Fundamentals and CAD Principles”, Computer Seminar, Kiev Institute of Cybernetics, Ukraine, 1977, October 12, 1 hour

 

Last Update:               March 18, 2011

 

———————————————————————————-

Back to Main Page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

——————————————————————————————————

Do not click the link below…..